Development of a High Resolution Spectrometer for Measuring the Near-Earth RFI Environment: The First Auto-Correlator in Space
A detailed description of the near-Earth RFI (radio frequency interference environment in the 0.5 - 16.5 MHz range is required before low frequency arrays can be designed and implemented...
Cables Over the Mississippi
As the designer of the Great River Bridge over the Mississippi between Gulfport, Ill. and Burlington, Iowa, Sverdrup Corp., St. Louis, had to find a way to connect the new five-lane crossing...
SemiActive Structural Control: A Low Cost Fix for An Infrastructure at Risk
There is increasing societal pressure on the engineering profession to develop cost effective methods to extend the service life of the civil infrastructure. While the degradation of the...
Lateral Response of Unreinforced Masonry Infill Frame Panels
This paper presents the results of the out-of-plane testing phase of the National Science Foundation Grant BCS 9102347. This project addresses the out-of-plane response to lateral loading...
Digital Signal Processing Techniques for Active Structural Control
In the past, implementation of active structural control strategies employing PC-based hardware has been problematic due to excessive computational times required for processing the measured...
A Numerical Study of Hydraulic Jump and Mixing in a Stratified Channel With a Sill
An x-z plane two dimensional primitive equation model is used to study sill effects in a narrow channel. The aim is to examine the generation of internal bores/waves, hydraulic jumps and...
Design, Construction, and Maintenance of Relief Wells
Technical Engineering and Design Guides, as adapted from the U.S. Army Corps of Engineers, No. 3 This engineering manual provides guidance and information...
Low-frequency Fluctuations of Suspended Sand and Wave Groups in the Surf Zone
Field observations of the sand suspension near the bottom in surf zone are presented and discussed. Calculated spectra of suspended sand concentration and wave envelope was found to be...
Design Waves and Wave Spectra for Engineering Applications
Thirteen years of hourly wave data measured at two of the National Data Buoy Center's (NDBC) buoy stations, one located in the northeastern Pacific and the other located in the northwestern...
The Evolution of Breakwater Design
The purpose of this paper is to present a view of the evolution of both the rubble mound and vertical faced breakwaters from the earliest design through the Iribarren and Hudson era. Determining...
Optimization of Reservoir Releases to Control River Sedimentation Using Differential Dynamic Programming
A new methodology is developed to address sedimentation control in alluvial rivers downstream of reservoirs. An optimization model is posed as a discrete-time optimal control problem to...
Education and Research in Water and Environment: Collaboration Between Minority and Majority Institutions
In 1992, a consortium of minority institutions (WREMCON) was formed to match expanding interest in environment with student interest to solve environmental problems and help with the nation's...
Problems Faced by Faculty in Minority Institutions
The primary objective of this paper is to list some problems faced by faculty engaged in both research and instruction in Minority Institutions (MIs) and to suggest solutions to them....
Elmhurst Quarry Flood Control Project
Conversion of a limestone quarry into an off-line reservoir provides flood protection for a rapidly developing County in the suburbs of Chicago....
Using GIS to Develop 2-D Hydraulic Models
As communities along rivers and streams continue to develop, the demand for more accurate floodplain analysis and flood warning will also increase. Computer systems continue to develop...
Evaluating Sensitivity of Hydraulic Control Optimization Models
Sensitivity of hydraulic control optimization models to variation in gradient constraints is examined. Monte Carlo simulation is used in conjunction with repeated optimization runs to...
Joint Probability Distribution of Rainfall Intensity and Duration
Intensity-duration-frequency (IDF) curves are widely used for peak discharge estimation in designing hydraulic structures. Accurate interpolated and extrapolated intensity values are difficult...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Classification of Problem Types
Design and operation of hydraulic systems can be an extremely complex task. Although not widely accepted the application of deterministic optimization techniques can provide guidance to...
Integration of Reliability, Uncertainty and Optimization in Hydraulics Systems: Structural Reliability
The focus of this paper is to provide an overview of analysis and optimal design of systems in which the system reliability is dependent upon the structure of the system (such as the layout...
Designing Optimal Reliable Multiquality Water Supply Systems
A methodology which integrates optimal design and reliability of a multiquality water supply system is presented and demonstrated. The system constructed is able to sustain prescribed...
Return to search